Revox C274 Manual
Find great deals on eBay for revox c274 and revox pr99. Shop with confidence.
OPEN OPEN LDP - -. = Default jumper selection LDP = Laser Disc Player Configuring the RCA Universal Remote To program the RCA remote press and hold the Code Search button until the red light comes on. Release the Code Search button and momentarily press the VCR button then enter the 3 digit code from the table above (default is 119). The red light should blink after each keypress and go out after the last digit is entered. Press the VCR button and press one of the transport control buttons (PLAY, STOP, FF, REW or REC).
Revox C278 Manual
The light on the front of the remote adapter should blink off momentarily. If the light does not blink off try reprogramming the remote or check the state of the jumpers inside the remote adapter. On the RCA remotes the REC button needs to be pressed twice to activate record. Configuring the DirecTV Remote: To program the remote first slide the switch at the top to AV1 or AV2. Press and hold the MUTE and SELECT buttons until the green light at the top blinks twice then release. Using the number keypad enter the 5 digit device code from the table above.
If done correctly the green light will blink twice after the last digit is entered. The full manual for the DirecTV can be found here: For instructions on configuring other remotes go to this page and select from the list of tested remotes. Maker of wireless remote adapters for vintage tape decks. Remote adapters are also available for, and decks.