• Software Download Sites

CMS is a rich video surveillance client program for the NVR software 'CyeWeb' (a NVR software working as a server program to record and stream videos from.

. DynaGuard™ 600 Series DVR Setup Guide Package Content Inspect the packaging carton.

Make sure the network DynaGuard™ 600 Series DVR is properly delivered. Remove all items from the box and make sure the box contains the following items. Press this key to control call monitor or 2nd main monitor. CALL Press this key to enter Dome Camera Control mode. DOME Press this key to view in full-screen or multiple window modes.

MODE Press once to start the playback of recorded video. Press again to exit. PLAY/STOP Press this key to freeze the current viewing screen. The DVR is capable of networking and it allows the videos to be viewed 10/100/1000M over the LAN network or the Internet by using the Internet Explorer. (RJ-45) The DVR provides a RS232 communication port for sending and RS232 receiving signals. Optional Audio Out connectors can be installed for each channel to Audio Out connect its individual audio output device. Pin Definition of Audio In / Audio Out For terminal blocks of Audio In and Audio Out, shown as below pictures, pins on the upper row are Audio In / Audio Out connectors for all channels, in sequential order from left to right.

All other pins on the bottom row are for ground connection. Configure the LAN setup when users plan to use a LAN, WAN, or Internet connection without a dialup modem. It requires an Ethernet connection to a network. The default ID of the network DynaGuard™ 600 Series DVR must be changed to avoid network conflicts. From OSD main menu, select.

Software Download Sites

Dome Camera Control Dome Camera Connection & Settings:. See section Pin Definition of Alarm I/O & RS-485 for RS-485 port pin definition. Refer to the following figure. Connect the R+, R− terminals on the dome camera to the D+, D− terminals on the RS-485 port by RS-485 cable respectively. Basic Playback Operation Search By Time:.

Press SEARCH to enter the Search menu. Move the cursor to “From” and press ENTER will start playing recorded video from the specified “From” time. Move the cursor to “End” and press ENTER will start playing recorded video from the specified “End”. Smart Search:. Press SEARCH to enter the Search menu. Move the cursor to and press ENTER. The Smart Search menu will show up.

Specify the From/End time to search for recorded video within the period. DVR Status Bar Icons Icons that will be displayed in the status bar are listed in the following table with their descriptions. Item Icon Description Item Icon Description Main Monitor Quick Export Call Monitor Stamp A Monitor Active/Inactive Stamp B Sequence Lock Record. Click to accept the settings and close the screen.

Using the Remote Software:. Start the IE and enter the IP address of the network DynaGuard™ 600 Series DVR in the address bar. The ActiveX controls and plug-ins dialog will show up twice for confirmation; click to accept ActiveX plug-ins.

The following picture shows the display window of the DynaRemote™: Refer to the table below for brief description of functional items: Item Description Item Description Select Picture Size HDD Health Status Download DVRPlayer 10 Playback Control View Live Camera 11 Instant Recording Playback Video 12 Audio On/Off Setup Menu. DynaRemote™ Playback Playback Remote Video:. Click on the main window toolbar, and then tab. The and on top of the screen display the date and time from which recorded video is available for playback. Mobile View Software Mobile View software allows users to timely monitor via a mobile device with internet connection. Refer to below for brief introductions of installation (JAVA mobile devices) and basic operations.

Download and Installation:. Access the java installation menu on a JAVA mobile device and connect the website that provides Mobile View software to directly download the software to the mobile device.